Instructions
Instructions
05
04
1
Add Water
Open the lid of water tank and fixed by hand. Use a measuring cup to add water into the water tank.
2
Prepare
After installation, placing the machine vertically on the horizontal floor, and keeping machine body
steady to press down the adjusting rod in a state of
＜
80° with groud.
2
Battery indicator
The 3 indicators shows the power at the condition, 80%-100%; 50%-80%; 10%-50%.
when the third indicator flashes, the battery power will run out, please charge it in time.
5
Cleaning pads replacement
lift the machine to tear it off, Put the dirty pads in the washing machine or wash it by hand. wash and
dry, and use it repeatedly.
6
After cleaning
After cleaning, standing the machine up, and place at the wall corner to avoid falling down.
4
Charging
Pulling the rubber out and exposing the charging port completely on the lower right coner of machine.
plug charging cable into the machine port. When charging, 0%-50% power; the lights up one by one
at the lower voltage; 50%-80% power, the 3rd indicator lights up; 80%-99% power, the 2nd & 3rd
indicator lights up and 1st indicator flashing; and all the 3 indicators lights up shows fully charge.
Note: Charging only on the power off condition, and please use original adapter to charge.
Before Working
Using
Installation complete
①
②
Stabilize the
machine body
3
Power On/Off
Press shortly to switch on; press
shortly to switch off.
Note: Alternate use of inward & outward rotation can enhance the cleaning effect.
3
Wire winding Situation
Press 1 second after machine working, the machine motor will get into outward rotation in 1 second
later. Which is using for wire winding situation betterly.
1
Water Spray
Press to spray water when power on.