7
Notes:
For the first use, if the water cannot come out from the filter holder you can
try the following steps then the water can come out from the filter holder.
1. Place a container under the Steam nozzle.
2. Please turn steam knob counterclockwise to the position
‘ + ’
and press manual
button
. when water spurts out from steam nozzle, press manual button
to close and turn steam knob clockwise to the position ‘
OFF
’.
PRIME THE APPLIANCE:
1. Fill water tank between
MIN
and
MAX
levels refer to
FILLING WATER TANK
in
section
HOW TO USE
.
2. Make sure steam knob is on
‘OFF’
position.
3. Select a filter and place on filter holder and fit filter holder on the brewing head,
hold handle of filter from
to
tighten, see marking on the
brewing head.
Notes:
a. Do not turn filter holder over tighten.
b.
The symbols indicate that user should insert the filter
holder into the brew head in the right position
and turn it along with the
arrow direction to lock . Oppositely, user removes the filter holder from the
brew head by turning it from
to
.
4. Plug the appliance in and switch on by pressing power button
to switch it
on. The indicator of power button starts blinking.
5. When the appliance is warmed up, the indicator of power button is illuminated.
6. Press 2-cup button
and the appliance start to work.
7. The hot water flow out from the brewing head, the water flow will be stopped
automatically once the drip tray filled with approx. 120ml water. You may
also stop the water flow by press the 2-cup button
any time during the
operation.
8. Repeat this cleaning process as per you expected.
9. When the process is completed, the appliance is primed and ready to be used.
10. You may continue to use the appliance as intended by follow the next sections.
Please switch off the appliance by pressing the power button and unplug the
appliance if you don’t want to use the appliance.
