ENKHO 158731.01, User Manual

Page: 21 / 42

8
EN
1. Unplug the appliance before any cleaning.
2. Allow the appliance cool down before cleaning.
3. Remove the jar from the motor unit and rinse the jar under running water.
4. Wiping the outer surface of motor unit with a damp cloth, do not use abrasive cleansers.
Never immerse in water or other solution for cleaning.
5. Clean the lid, cutting attachment and blender jar under hot running water and mild
dishwashing detergent. Dry all of the pieces completely before using again.
6. Dry all parts and then reassemble them again. But store the appliance with the jug lid not be
closed completely to allow air to circulate and prevent jug odors.
7. If any problem has been encountered during use, never disassemble the Motor Unit by
yourself, there are no user serviceable parts inside. Contact only the authorized service facility
for examination and repair.
8. Clean food contact surfaces with water and mild dishwashing detergent. Allow the surface
to air-dry.
CLEANING AND CARE
WARRANTY
CORRECT DISPOSAL OF THIS PRODUCT
The appliance is guaranteed for three years from the date of delivery years from the date of
delivery, as shown by the date on the receipt/invoice.
In case of defect existing before purchase, the replacement is guaranteed. The warranty does not
cover those parts found to be faulty as a result of negligence or careless use. The warranty also
excludes all cases of improper use of the appliance or any instances of use of professional type.
The seller refuses to accept any liability for damage that may directly or indirectly be caused to
people, property or pets as a result of failure to abide by all instructions contained in this manual.
The symbol representing the crossed out trash can on the appliance indicates that the
product, at the end of its useful life, must be treated separately from domestic waste. It
must be taken to a recycling centre for electrical and electronic appliances or turned in
to the point of sale when purchasing a new, equivalent, appliance. Correct consignment
of the no-longer used appliance to a recycling centre for treatment and environmentally
compatible elimination avoids negative impact on the environment and public health, and makes
possible the recovery the materials that the product is made from. The user is responsible for
taking the appliance to the recycling centre at the end of its life. For more detailed information
regarding the available collection systems, contract the local refuse centre or the store where the
product was purchased. Anyone who leaves or throws away this appliance without taking it to
a collection centre for electrical-electronic waste, shall be punished by administrative fine as per
applicable law on illegal waste disposal.