23
EN
∫ Remove the left glue stick (4) from the feeder shaft (5) and use a soft cloth to clean the
glue gun and the nozzle (10). Do not use cleaning agents or solvents.
∫ Never scrape or file any residues off the appliance and nozzle (10) with hard objects.
Maintenance
Prior to every use, check the appliance for obvious defects such as loose, worn or
damaged parts. Replace as necessary.
∫ The appliance must always be kept clean, dry and free from oil or grease.
∫ Do not allow any liquid to get into the appliance.
STORAGE
∫ Clean the equipment before putting it away.
∫ Allow the appliance to cool down completely before you store it away.
∫ Store the device in a dry, frost-free and dust-protected location out of the reach of
children.
∫ Always use the original package to store it.
TROUBLE SHOOTING
Problem
Possible cause
Corrective action
Nozzle (10) does not
heat up
Battery is flat
Charge the battery
USB charging cable (9) or
charger faulty
Repair by Service Centre
Poor gluing
The temperature at nozzle
(10) is low
Check if the switch is ON
Repair by Service Centre
The glued surface is not clean
Check and clean the glued
surface.
Only get the spare parts replaced by the authorized service centre.
