6
EN
Hair curling:
1.
Allow the appliance to cool down completely on a heat-resistant surface.
2.
Remove hair and dirt from the appliance. Wipe dirt off by a soft slightly moistened cloth.
3.
Protect the appliance from dust, dirt and humidity.
1.
Divide the hair into sections. (Approx.2 cm width)
2.
Press the tong lever. Take the end of hair between the tong and the curling iron, release the
tong lever to clamp the hair.
3.
Hold the curling tong firmly by cool tip and handle, turn curling tongs up to hairline and
wrap a strand of hair around the curling tong.
4.
Leave hair curled up for a few seconds.
5.
Gently remove hair by turning curling tongs.
6.
Press the lever to remove all hair from curling tongs.
Note:
Safety notice:
In the event of overheating, the appliance switches off. Allow the appliance to cool down
completely before switches it on again. The appliance switches off automatically after 60
minutes.
CLEANING AND CARE
•
Caution for hot surface!
Do not touch heating curling tongs. Only touch cool tip and hold
handle during use.
•
Make sure the hot surface of curler are kept away from scalp.
•
Let your hair cool down before brushing.
•
Do not leave the hot curling tong to your hair in one position for longer than few seconds or
else it may damages your hair. Start with a low temperature level to find out the appropriate
application for your hair.
•
Always switch off and unplug the appliance before cleaning.
•
Always allow the appliance cool down completely before cleaning.
•
Never immerse any part of the appliance into water or other liquids
•
Do not use any aggressive, caustic, abrasive, or corrosive cleaning products or hard brushes.
Warning!
