30
EN
19
Battery
20
Allen wrench
21
Red battery LED (battery charging)
22
Green battery LED (quick charger ready
for operation)
26
LED work lamp
Scope of delivery
•
1 x Cordless jig saw
•
1 x Rip fence
•
2 x Saw blade HCS wood
•
1 x Saw blade HSS metal
•
1 x Adapter for dust extraction
•
1 x Anti-splinter guard
•
1 x Sliding block
•
1 x Rechargeable battery
•
1 x Quick charger
•
1 x Allen wrench
•
1 x Transport case
•
1 x Manual
Technical data
Parameter
Value
Model
149800.01
Idle speed
0 – 2,700 min
-1
Cutting angle
0° / 15° / 30° / 45°
Weight incl. battery
2 kg
Battery
151218.01
Type
Li-ion
Nominal voltage
20 V
Capacity
2 Ah
Quick charger
151220.01
Input
Nominal voltage
230 - 240 V / 50 Hz
Power consumption 65 W
Output
Nominal voltage
21.5 V
Charging current
2.4 A
Charging time
1 h
Protection class
II/
Parameter
Value
Vibration information according to EN 60745
Total vibration emission value:
Sawing chipboards
a
h,cw
Uncertainty K
12.3 m/s²
1.5 m/s²
Sawing sheet metal
a
h,cm
Uncertainty K
5.1 m/s²
1.5 m/s²
Sound values according to EN 60745
Sound pressure level
L
pA
82 dB(A)
Sound power L
WA
93 dB(A)
Uncertainty K
3 dB
Wear hearing protection.
Excessive noise can lead to hearing loss.
Information on vibration:
• The declared vibration total value has
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
Caution
Vibration emissions can cause a health hazard
if the device is used for an extended period
of time or if it is not properly handled and
maintained.
• The vibration emission during actual use of
the power tool can differ from the declared
total value depending on the ways in which
the tool is used. The vibration load may
be underestimated if the power tool is
used regularly in such a way. For a precise
estimation of the vibration load during a
certain work period, it is also important to
take account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time. This can reduce
the vibration load over the entire work
period significantly.
