7
Note:
Washing the bag in warm water with a mild dishwashing soap, then rinse the bags well and
allow drying thoroughly before reusing.
•
Sealing gaskets should be dried thoroughly before reinstalling. Carefully reinstall gaskets in
positions.
•
Do not attempt to remove the Heat sealing strip. Wipe the dirt away with soft cloth or
tissue.
Bag cleaning:
Storage:
Warning:
Do not reuse bags that have been used to store raw meat, fresh fish or greasy foods.
1.
Unplug the appliance from electrical outlet.
2.
Keep power cord in the cord compartment at the bottom of the device.
3.
Store the appliance in a flat and safe place, out of reach of children.
4.
Ensure the lid is unlocked when it is not in use and store away. Please slightly pull down the
lid to close.
TROUBLESHOOTING
Problems and possible causes
Solutions
The appliance doesn’t work by
pressing Operation Button.
•
Make sure the power cord is correctly plugged into
the electrical outlet.
•
Check the power cord for any damage, if it is
damaged do not use the vacuum dealer.
•
Make sure the electrical outlet is operative by
plugging in another appliance. If it’s not, please
check the circuit breakers or fuses in your home.
•
Make sure the bag is positioned correctly down in
the vacuum chamber.
•
Press down on both sides of the lid and make sure
it is locked in place.
•
Wait 25 minutes to allow appliance to cool off and
try again.
Air is not completely removed from
the bag.
•
To seal properly, the open end of the vacuum bag
should be resting entirely the vacuum chamber.
•
Check the sealing strip and gaskets are clean and
well installed in position.
•
Check the vacuum bag and make sure it is not
cracked or damaged. Change a new bag in this
case.
•
Make sure the lid is locked securely.
•
Seal one bag at a time only. Make sure the end of
the bag is unfolded and smooth.
