Advanced Settings
- 17 -
enough power capacity. The camera is in Cam mode and cam+video mode, not Video
mode.
• SIM card is installed. The MMS service is active (some MMS services need pre-paid
balance in the account.) The SIM card is not password-protected.
• Only when the switch is in OFF position, you install the MMS-module additional battery
box.
• The signal is strong in the field. The recipient’s phone number is entered correct. You are
suggested to take the receiving phone with you and do the send-and-receive test on site.
• MMS parameters are set correct.
• The Timer function is OFF. If you have the Timer ON, make sure you are in the specified
time period when expecting incoming MMS pictures.
•
Make sure it is not set OFF.
•
The setting is “0”, or the
daily limit has not been reached. If the daily limit has been reached, you can reset that
parameter on your computer or on the TFT display. Then the daily limit starts to count
from one.
• The camera is stationary while sending MMS pictures.
3.6 View Local MNPO name and Signal Strength on TFT Display
You can find your local Mobile Phone Network Operator’s name and the signal strength on
the TFT display of the camera, just like you can see the information on a regular cell phone.
Install the SIM card and 8 AA batteries. Make sure the camera is switched in OFF position.
Attach the MMS-module additional battery box to the camera. Switch to the TEST position. If
you’d like, you can connect the camera to a TV using provided TV AV IN cable. Wait for 1
minute and then you can view the MPNO name and the signal strength on the TV. If you don’t
have an access to a TV, wait for 1 minute and detach the battery box. Then you can view the
information on the TFT display.