viewpoint, this method will always provide inaccurate
readings, and should not be used if precise
measurements are required. Normal temperature
between 35.2
o
C and 36.7
o
C (95.4
o
F and 98.1
o
F).
4.
The degree sign flashes throughout the testing process for
approximately 10 seconds depending on the place where you are
taking the measurement (Oral, Rectal, Armpit).
When flashing
stops you have your measurement
and a very soft alarm will beep,
the measured reading will appear on LCD simultaneously. The
displayed temperature will not change when thermometer is
removed from its testing position.
How to Calibrate your thermometer:
The thermometer is initially calibrated at the time of manufacturing. If the
thermometer is used according to the manual, periodic readjustment is not
required. However, we recommend conducting a quick calibration to confirm
that your unit didn't get damaged during shipment. A quick way to calibrate
your unit is by doing the water test. Dip the tip of the thermometer into a cup
of cold water for a few seconds. Your display should show 'Lo' (meaning low
temperature, not low battery) or a low-temperature reading number (for
example it shows 33 °C or 91°F). Power it OFF then let it sit for two minutes
or three, power it ON, dip the tip into a cup of hot water this time for a few
seconds. Wait for your thermometer to show 'Hi' or a high-temperature
reading number on its LCD display (for example it shows 38 °C or 100 °F).
Power it OFF, Leave it at room temperature for 30 to 45 minutes and start
using it, and it will mean that you have successfully checked your
thermometer and that you are good to go! If you find that your reading is
very low and/or not changing the display of the number on the LCD screen at
all, please get in touch with us through email with your Amazon Order ID.
Do not forget to extend your warranty
by registering your product on our website:
For more info, email us at,
or visit:
Enji Prime. Copyright 2020
