Enigma XS2 Wheelchair
Page 6 of 12
To go down a kerb. Line up the front castors with the edge of the kerb. The
attendant uses the stepper tube to raise the front castors and tip the user
slightly back. Keeping the castors raised, slowly lower the wheelchair down
the kerb.
Adjusting Anti-Tip Wheel Height
The stepper tube comes with an integral
anti-tip wheel. To adjust the height of
this wheel pull the metal disc (arrowed)
and move the wheel to the correct
height, and release.
Warning: When going down a kerb, the front castors must be raised to
prevent the user from falling out. The above are only recommendations
and may not be suitable for all events / users.
brake operation
Parking Brakes
To apply the parking brakes, push the handle on the brake unit until locked in
place. To release the brake, push the handle in the opposite direction.
The brakes should always be applied when the wheelchair is stationary.
Cable Brakes
On the transit model, the attendant
pushing the wheelchair may use cable-
operated brakes to slow or park the
wheelchair. To apply the brakes,
squeeze the large lever (A) on the push
handles and the brakes will be applied.
The brakes will remain applied until the
small lever (B) on the brake handle is
pressed to release the lever.
