2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the Overbed Table.
1. It is the responsibility of the owner to ensure
that all users of this Overbed Table are
adequately informed of all warnings
and precautions.
2. Use the Overbed Table only as described
in this manual.
3. Place the Overbed Table on a level surface.
4. Keep the Overbed Table indoors,
away from moisture and dust. Do not put
the Overbed Table in a garage or covered
patio, or near water.
7.Inspect and tighten all parts of the Overbed Table
regularly.
8. Never insert or drop any object into any opening.
9. This Overbed Table is intended for in-home use
only. Do not use this Overbed Table in any commercial,
rental, or institutional setting.
WARNING:
Ensure that the table is assembled as described, and that all components are
securely attached, before use.
SAVE THESE INSTRUCTIONS
5.
This Overbed Table utilizes a high-tension air
Pneumatic cylinder loaded to raise the table.
Do not remove shipping Block Pin from
column assembly prior to assembly.
The column assembly may cause injury.
Check for any obvious damage to the carton or its
contents. If damage is evident, DO NOT USE. Contact
carrier / distributor for further instruction.
6.
IMPORTANT
Make sure that the power switch is set to OFF before plugging in the bike.
Before plugging in check that the rated voltage shown on the plug
matches your local voltage.
Do not use outdoors or anywhere there is a risk that bike, power lead
or plug could get wet.
