20
Charging & Using Batteries
To charge the Nickel-Metal Hydride (NiMH) batteries
inside your Pebble, simply connect the included AC
adaptor/power supply as described on the bottom of
page 10. You can continue to use the Pebble even
while the batteries are being charged.
Your Pebble has two small
indicator lights (LEDs)
located on the side of the unit.
The LEDs indicate the current
power state and charge status
of the batteries
(see Figure 1).
Refer to the table below for more information
regarding the meaning of each LED indicator light:
Battery Charging Procedure
Built-In Battery Charger Status Indicators
#2
#1
Figure 1
LED #1
Color
LED #2
Color Meaning:
Green
Off
Battery OK & DC Present
Green Amber
Battery charge near completion
Green
Red
Batteries charging
Off
Off
Battery or DC power only
Amber
Off
Faulty Battery charge
Note: When your Pebble has less than 3 minutes
of battery power remaining, Pebble will begin
to sound a series audible short beeps every 30
seconds. When this occurs, please recharge or
replace the batteries soon.
