background image

                                                         

For OTS Folding Instructions, see page 19 

 

REFOLDING the RollerAid™ FFOTS

 

 

In most circumstances simply removing the basket and handlebars 

before folding down the handlebar folding assembly will be sufficient to 

collapse the RollerAid™ for transport.  Wher

e the minimum dimensions 

are required the frame hinge can also be folded. 

 

1.

 

Remove the basket by pressing down on the red button on the 

basket collar and lifting the basket off. 

 

2.

 

Remove the handlebar by opening the handlebar height quick 

release and sliding it out of the handlebar folding assembly. 

 

3.

 

Undo the handlebar folding assembly quick release and then 

press the silver button in before folding the assembly down. 

 

4.

 

To fold the frame hinge, open the frame hinge quick release and 

rotate it towards you.  Allow the pin to drop down. 

 

5.

 

Fold the frame and lock it in place using the Velcro™ strap.  

Slide the handlebar through the strap and, if necessary, release 

the bench quick release to lower the bench. 

 

Detailed instructions for attaching and removing the basket, 

removing and replacing the handlebars and for folding the 

handlebar assembly begin on Page 14 of this manual. 

 

 

 

 

 

 

 

 

 

 

13 

 

SET UP & ADJUSTMENT 

 

For OTS Set Up, see page 14 

 

Special Instructions for FFOTS models 

 

The Folding Frame OTS model of the RollerAid has an additional 

folding hinge that allows it to be folded down to extremely small 

dimensions.  Please read these instructions carefully before using your 

FFOTS RollerAid™ for the first time.

 

 

Please use the photograph below to orient yourself to the major features 

referred to in this section. 

 

 

 

Your safety is our primary concern.  If you have any concerns or 

problems please call our staff at 800-755-0455 and we will be pleased to 

help. 

 

Before using your RollerAid™ please consult the remainde

r of 

this manual for important Safety and Use information.  

 

10 

 

Velcro™ strap

 

Bench Quick  

Release 

Hinge Assembly and Quick Release 

Handlebar Folding

  

Assembly 

Basket Release 

Handlebar Quick  

Release 

 

 

Roller Air Manual Complete.indd   10

5/20/08   3:37:46 PM

Summary of Contents for RollerAid FFOTS





















Reviews: