ENHANCE THEOREM 2, Software User'S Manual

Page: 8 / 11

8
Double-Click Speed
Here you can set how far apart two clicks can be while still registering a double-click. The higher the value, the faster the clicks must follow one
another to register a double-click. Click within the bar labeled 1-10 to select a Double-Click Speed. When a change is made, click Apply to save the
change to the mouse.
Scroll Speed
When scrolling, the scroll wheel moves the on-screen image up or down at a given rate. This setting allows the scroll speed, as represented by the
number of rows, to be modified. A higher value will allow for more scrolling with fewer turns of the mouse wheel. Click on the One page box if the
to set the scroll to a single page. After a change is made, click Apply to save the change to the mouse.
Sensitivity
The sensitivity of the mouse’s Horizontal (X) and Vertical (Y) axis can each be adjusted. Increasing the value will make the mouse more sensitive for
that given axis. After a change is made, click Apply to save the change to the mouse.
Polling Rate
The polling rate is the query time between the computer and the mouse. The higher the Hertz (Hz) value, the shorter the time between queries.
Click on the circle to adjust the USB Report Rate. Select from one of four settings. When a change is made, click Apply to save the change to the
mouse.
- 125 Hz, 8 ms
- 250 Hz, 4 ms
- 500 Hz, 2 ms
- 1000 Hz, 1 ms
DPI Settings
Here you can set up to 6 individual DPI values. The greater the DPI value, the faster the mouse’s cursor movement. The DPI buttons on top of the
mouse are used to select the desired DPI setting. The mouse’s DPI LED indicator color for any given DPI value is located next to the DPI selection box
of each of the six settings. After making changes to the DPI Settings select Apply to save the settings.