5
1. Fast Installation
1.1 Camera Interface Explanation
Photo 1.1 Interfaces
Interface
：
1
.
Camera Lens
5
.
Locating Hole
9
.
USB 2.0 Interface
2. Remote Controller
Receiver Light
6
.
RS232 Control Interface (input )
10
.
DC12V Input Power Supply Socket
3
.
Camera Base
7
.
RS232 Control Interface (output )
4. Tripod Screw Hole
8. RS485 Control Interface ( Left + / Right - )
Notice
：
A rubber pad is available in the accessories. Please install it at the installation place
in the bottom middle bracket when using the product.
1.2 Power on initial configuration
1) Power on: Connect DC12V power supply adapter with power supply socket.
2) Initial configuration: Power on with power indicator light on and remote control receiver light blinking, camera
head moves from bottom left to the bottom, and then goes to the HOME position (intermediate position of both
horizontal and vertical) while the camera module stretches. When remote control receiver light stops blinking, the
self-checking is finished.
Note:
1. The default address of the remote controller is the 1# address.
2. If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0
position.
