ATX/ATX12V Power Supply Design Guide
Version 1.1
Page 8
2. Applicable Documents
The latest revision in effect of the following documents forms a part of this document to the
extent specified.
Document title
Description
AB13-94-146
European Association of Consumer Electronics Manufacturers (EACEM)
Hazardous Substance List / Certification
ANSI C62.41-1991
IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Circuits
ANSI C62.45-1992
IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power
Circuits
MIL-STD-105K
Quality Control
MIL-STD-217F
Reliability Predictions for Electronic Equipment
MIL-C-5541
Chemical Conversion Coatings on Aluminum and Aluminum Alloys
CSA C22.2 No.234, Level 3
Safety of Component Power Supplies (Intended for use with Electronic Data
Processing Equipment and Office Machines)
CAN/CSA C22.2 No.950-95,
3
rd
edition
Safety of Information Technology Equipment Including Electrical Business
Equipment
UL 1950, 3
rd
edition, without D3
Deviation
Safety of Information Technology Equipment Including Electrical Business
Equipment
IEC 60950 plus A1, A2, A3, A4
Safety of Information Technology Equipment Including Business Equipment
EN 60950 plus A1, A2, A3, A4
Safety of Information Technology Equipment Including Business Equipment
EMKO-TSE (74-SEC) 207/94
Nordic national requirement in addition to EN 60950
CISPR 22:1997 3
rd
edition
EN 55022:1998
Limits and Methods of Measurements of Radio Interference Characteristics of
Information Technology Equipment, Class B
ANSI C63.4 – 1992
American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9
kHz to 40 GHz for EMI testing
EN 55024:1998
Information technology equipment—Immunity characteristics—Limits and methods
of measurement
EN 61000-3-2
Electromagnetic compatibility (EMC)—Part 3: Limits—Section 2: Limits for
harmonic current emissions, Class D
IEC 61000-4-
Electromagnetic compatibility (EMC) for industrial-process measurement and
control equipment—Part 4: Testing and measurement techniques
Section -2: Electrostatic discharge
Section -3: Radiated, radio-frequency, electromagnetic field
Section -4: Electrical fast transient / burst
Section -5: Surge
Section -6: Conducted disturbances, induced by radio-frequency fields
Section -8: Power frequency magnetic fields
Section -11: Voltage dips, short interruptions, and voltage variations
Japan Electric Association
Guidelines for the Suppression of Harmonics in Appliances and General Use
Equipment
IEC Publication 417
International Graphic Symbol Standard
ISO Standard 7000
Graphic Symbols for Use on Equipment
CFR 47, Part 15, Subpart B
FCC Rules
