25
E901 FULL USER MANUAL
5 sec.
There is a small hole to the right of the OK button. This is the reset button. Pressing the reset button will restore the default values in the user settings
(i.e. time, schedule).
To perform factory reset (which will remove all user/installer settings), use the CLR parameter from installer parameters menu. After confirming the
parameter, the thermostat will restore the default settings.
9. Clear settings - factory reset
8. User settings reset
1
2
Press any button to highlight the display.
Use or buttons to move to CLR parameter.
Confirm the new parameter value with the button.
Press button for 5 seconds.
3
4
Please note:
3
.
Do not use a pencil to press the reset button as the graphite build-up on the stylus can short-circuit
and damage the thermostat. In environments with very strong electrostatic discharge (+/- 8KV), the
product may not function as under normal conditions. So the device may need to be reset.
