Installation Guide for
Faux Wood Blinds
2
Installing the Blind
Valance Clips
Prior to installing the blind into
the brackets, hook the valance
clips evenly along the length
of the headrail.
Open the gate of the box brackets,
lift the blind up and slide the headrail
into the open brackets. Swing the
hinged section of the bracket down
and press firmly until it is locked.
3
Installing the Valance
Place the valance onto the valance
clips and push it into position.
If your blind has been supplied with valance returns, slide the valance return clip
into the valance. Slot the other end of the valance clip onto the valance return
and push them together until the edges align.
Handy Tip
If you pull on the cords to tilt/rotate the slats and they do not move:
• Firstly, make sure the slats are in the fully open position and the two tilt cords are the same length.
• Next, pull the blind all the way up to the top, lock it off and remove the blind from the brackets.
• Now check inside the headrail and make sure the long metal rod is pushed fully into the tilting
mechanism (as illustrated).
