INSTALLATION
INSTRUCTIONS
TAPWARE
Englefield
STUDIO
If you are building a
bathroom from scratch,
giving your bathroom a
makeover or just replacing
an old tap, Englefield can
provide a solution for you.
ROUGH-IN
NEW ZEALAND
KOHLER NZ LTD
Free Ph: 0800 100 382
Free Fax: 0800 664 488
www.englefield.co.nz
AUSTRALIA
KOHLER CO.
Free Ph: 1 800 ENGLEFIELD
(1 800 364 533)
www.englefield.com
For warranty information, please visit our website
Page 4
1315151-AN2-B July 2017
Englefield
INSTALLATION INSTRUCTIONS
STUDIO
Pin Lever Shower or Bath Mixer
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of
publication. ENGLEFIELD reserves the right to make changes in product
characteristics, packaging, or availability at any time without notice.
Please leave this installation guide for the consumer as it contains
important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Ensure all local plumbing codes are observed.
3. Optimum working pressure: 100kPa to 500kPa.
4. Minimum working pressure: 35kPa.
5. Maximum working pressure: 500kPa.
6. If pressure exceeds 500kPa, a pressure limiting valve must be installed.
7. All installations should comply with the relevant requirements of AS/NZS 3500.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a
clean soft cloth. Many cleaners may contain such chemicals as ammonia, chlorine, toilet chemicals etc. which
could adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Englefield tapware.
CONTACT AND WARRANTY INFORMATION
SPARE PARTS LIST
35 - 60
107
Ø80
3 x Male G1/2’’
1315151-AN2-B July 2017
No.
Description
Part No.
1
Plug
2
Screw
3
Pin lever handle
1315417-**
4
Bonnet
1250280-**
5
Nut
6
Cartridge
7
Face plate
8
O-ring
9
Outer sleeve
1 0
O-ring
1
2
3
4
5
6
7
8
9
10
35 - 60
107
Ø80
3 x Female Rc1/2’’
1250284
1250283-**
1250282
1250278
1315418-**
1315419
1315420-**
1315422
** Please specify a colour when ordering:
-CP (Chrome),
-BN (Brushed nickel),
-BL (Matte Black)
97533A-4
97533A-N4
(Female Rc1/2” connections)
(Male G1/2” connections)
97533A-4
97533A-N4
Pin Lever Shower or
Bath Mixer
97533A-N4
Female Rc1/2” valve (Shown)
97533A-4
Male G1/2” valve (Not Shown)
O48
O48
