1 Fixing the cabinet to the wall
(b) To make installation easier remove the cabinet
door/s. To release hinges press the buttons at
the rear of the hinges and unhook the hinge.
INSTALLATION
TOOLS AND MATERIALS REQUIRED - (Not Supplied)
Page 2
INSTALLATION INSTRUCTIONS
ENGLEFIELD
To suit pipework
To suit screws
TOOLS
MATERIALS - Not supplied & must be purchased separately
Fixing washers
20mm
Screws (Refer step 3)
10g x 75mm
Hook
Button
SAPPHIRE
TM
Mirror Cabinets
(a) Choose the orientation of the cabinet. The
cabinet can be rotated to be left handed or
right handed.
(c) Fix the cabinet in place using 6 screws (min 10g
x 75mm) and 6 *washers (20mm) to fix the
cabinet.
*
Washers must be used to spread the load.
NOTE:
Before fastening the cabinet make sure
that it is level and square.
On-wall installation:
Screw through the back wall into the two nog/s.
In-wall installation:
Screw through the sides into the studs.
Screw positions
for cabinet
80
50
Screw positions
for cabinet
2 Installation finalisation
(b) Re-install the cabinet door/s. Hook the hinges
onto the base plates and press down as shown.
(a) Make sure the shelves are installed correctly
for your selected cabinet orientation. The metal
pin must be on the bottom of the shelves.
Hook
Base plate
Shelf
Metal pin
Plastic shelf
clamp
INSTALLATION COMPLETE
