TIMBER
When installed on a timber floor, the floor board should be supported at not greater than 500mm centres
and the cut-out waste connection kept to a minimum.
CONCRETE
When installed on a concrete slab floor, chases or channels left for plumbing must be completely backfilled.
B) FLOOR CONSTRUCTION
1) Ensure that the wall framing and lining are constructed in accordance with one of the following
illustrations (Fig. 4 or 5).
2) Measure the back and side wall(s). The dimensions of the shower area (measured to the finished
surface of the wall board) must be as shown below. This is particularly important for Alcove (3-sided)
installations where an Englefield Duracryl wall will be installed.
3) Ensure studs are located as shown (dimensions A,B & C) to provide a solid support for the door and
return panels.
C) WALL CONSTRUCTION
INSTALLATION INSTRUCTIONS
QUICK-FIT SHOWER TRAY
-3-
®
Fig. 4 - Corner (2 sided) Wall
Fig. 5 - Alcove (3 sided) Wall
B
+2
-0
D
+2
-0
C
+2
-0
C
D
SHOWER TR AY
884
1164
900 X 1200 X 900
750 X 900 X 750
739
864
984
964
1000 X 1000 X 1000
884
864
900 X 900 X 900
900 X 750 X 900
885
747
A
+2
-0
A
B
SHOWER TRAY
984
984
1000 X 1000
884
884
900 X 900
900 X 750 *
734
884
884
1184
1200 X 900 *
* Asymmetric trays are handed, eg: 900x750 Right = 750x900 Left
Dimensions are to the finished surface of the wall board
