-5-
V087600-A02-M 07-09-2012
Kohler Co.
On the inside of the Hinge
Post, fit slotted plastic bush
through the hole in the glass.
IMPORTANT: ADJUSTMENT
SCREWS MUST BE ADJUSTED IN
SEQUENCE TO AVOID
DISTORTION OF HINGE POST.
Position Door Edge Seal.
DOOR EDGE
DOOR EDGE
SEAL
IMPORTANT: ENSURE BOTTOM
OF DOOR EDGE SEAL IS
CORRECTLY FITTED AS SHOWN.
7
Position glass by taping the
77
spacer supplied to the bath as
77..
shown below. Level top of glass
with top cap.
CAUTION: Care must be taken
to avoid cross-threading the
cap screws in the Hinge Plate.
8
On the inside of the Hinge
On the inside of the Hinge
Post, fit slotted plastic bush
Post, fit slotted plastic bush
Post, fit slotted plastic bush
Post, fit slotted plastic bush
Trim the top of the Door
Edge Seal flush with the
glass.
9.
For “out-of-true” walls, level
Hinge Post using adjusting
screws.
5.
Max 22mm
Max 22mm
6.
Fit Top Cap in place using
silicone and tape down.
10.
Ensure that the slot in
the top bush is vertical
and the slot in the bot-
tom bush is horizontal.
IMPORTANT
Using M8 CSK screw
attach
Inner Hinge Plate.
NOTE: Fix top hinge first.
Tighten screws firmly
to secure glass.
BOTTOM HINGE
TOP HINGE
