(a) Slot return panel into wall retainer and
hold in position (Check orientation.
Make sure horizontal aluminium
extrusion is at the bottom and glazing
gasket is on the inside).
(a) Slot door frame into wall retainer.
(Check orientation. Make sure handle
holes are on return side).
(b) Swing door frame towards return and
carefully click door corner post into return
corner post (Make sure there is no gap
where posts join and that post tops are
flush with each other).
Refer to post profiles below:
Post profiles:
Return
Door
(a) Remove corner post seal.
Page 6
INSTALLATION INSTRUCTIONS
MILANO
Square
2.2 Return
2.4 Frame Fixing - Corner Posts
2.3 Door
