background image

Congratulations on your choice, the         TUBE TONER. The engine room 
of this crafty combination of four different components is the 
four-channel, all-tube preamp. It is responsible for the extraordinary tube 
tone that is definitely up to professional stands. Next up is a MIDI
footswitch, which is connected to the channel switching circuit. It lets you 
access a total of 10 MIDI program numbers located in Banks A and B, 
which gets the job done for a wide range of applications. The TUBE 
TONER is all about great tone, but we considered portability and 
versatility essential attributes, so we added a filtered stereo line out to 
put speaker simulated recording and direct-to-desk signals at your 
disposal. And finally, we equipped the TUBE TONER with a miniature 2 x 
1.5-watt stereo poweramp so you can get in hassle-free rehearsal time and 
maybe write the odd tune or two at weird hours without alienating the 
neighbors. This small-but-very-practical amp can drive stereo headphones, 
hi-fi systems or conventional guitar cabinets. In addition to these four 
main components, you have load of other handy features at your
disposal, including a stereo FX loop and variable stereo line outs. The two 
main channels Clean and Lead are each equipped with dedicated gain and 
volume controls for precision level adjustments.
The bypass circuit routes your guitar signal directly to the output, which 
lets you set up a serial string of preamps or access combo preamps 
separately. This feature gives you an incredibly varied range of tonal 
options. If you´re thinking about using the TUBE TONER in a rig powered 
by a stereo tube power amp, the          840 might be just what you need, 
or if you want to go for a truly modern rig, the 930/60 (930/120) is 
equipped with a bunch of sound shaping features you won´t find 
anywhere else - some even claim that this power amp works with 
something akin to sonic sorcery. 
This Tube Toner is defined by the effort and materials that went into it:
intelligent design features, superior craftsmanship, impeccable finishing 
and quality components. However keep in mind, that a few precautions 
will radically extend tube life (see handling and care guidness). 
The entire

             

-Team would like to thank you for your faith in our 

product; we hope you derive a great deal of joy and satisfaction from 
your            TUBE TONER.

PLEASE NOTE:

 Read the Operator's Manual carefully and thoroughly, 

especially the Handling and Care section as well as the guidelines in 
bold-face type. Avoid operating errors and potential damage to the TUBE 
TONER by heeding the guidelines and cautionary remarks in this manual. 
The boxes shaded in gray located between the diverse descriptions of the 
amp´s functions contain interesting tips covering the preceding function. 

3

Summary of Contents for TUBE TONER E430













Reviews: