The last page contains a front- and backpanel illustration!
FRONT PANEL
1 INPUT
Unbalanced 1/4" input jack
2 GAIN .............................................................................................................................
TIP 1
Input sensitivity control, functions as a pre-gain for both channels
3 BRIGHT (Lo/Hi) ............................................................................................................
TIP 2
Alters the EQ by boosting the upper treble range;
effectiveness decreases at higher GAIN (2) settings.
4 RHYTHM BOOST(Lo/Hi) .............................................................................................
TIP 3
Boosts the sensitivity in the Rhythm channel
5 LEAD
Controls the amount of distortion in the LEAD mode; the GAIN (2) and
LEAD controls are used to define the relationship between the Rhythm and Lead signals.
CAUTION:
Extremely high gain and volume levels in the Rhythm and Lead mode can produce
strong feedback. Avoid feedback squeals, they lead to hearing loss and damaged speakers!
6 LEAD BOOST
Boosts the degree of distortion in the Lead channel, with primary emphasis on the bottom end.
7 BASS .............................................................................................................................
TIP 4
Bottom end voicing control in the main EQ
8 MIDDLE .........................................................................................................................
TIP 4
Mid-range voicing control in the main EQ
9 TREBLE ..........................................................................................................................
TIP 4
Upper range voicing control in the main EQ
10 HI RANGE SUPPRESSOR ...........................................................................................
TIP 5
This control suppresses mid-/high range frequencies, and defines the control range
of the TREBLE (9) feature.
11 VOLUME RHYTHM
Volume control for the Rhythm channel
12 VOLUME LEAD
Volume control for the Lead channel.
13 VOLUME MASTER
Master volume control for power amp output; the feature to switch between two Master volume
levels (Hi/Lo-Master Volume) can be accessed by means of a footswitch (See 22)
14 RHYTHM/LEAD
Channel selector pushbutton for the Rhythm and Lead modes,
red LED indicates Lead mode is active.
15 PRESENCE RHYTHM
Treble control for the Rhythm channel in the power amp
4
