Engl mfx
page 8
Powering the unit
The ENGL-MFX can be operated using an AC adapter (E 1041).
Additional AC adapters are available for purchase separately. You can
charge the battery by connecting the unit to a computer by USB or
using an AC adapter. When shipped new, the built in battery is not
sufficiently charged, so it must be charged before using the unit.
Charge the battery or connect the AC adapter before using the unit.
Charging the battery
There is several methods to charge the device.
Charging with a computer
Use the USB port on the right side panel, and use the included USB
cable to connect the unit’s USB port to a USB port on a computer.
Please connect this unit directly to a computer. Proper charging and
operation cannot be assured when using a USB hub.
When connecting via USB, the device starts. To save energy and to
fasten charging, turn it off by pressing the power switch on the top.
Even if the power for the unit is off, the battery charges when
connected to a computer by USB. The computer needs to be ON to
charge the battery.
Complete charging by USB takes about 2 hours (when the unit’s
power is OFF).
Charging with an AC adapter
Use the USB port on the right side panel, plug in the included USB
cable, connect the AC adapter to the USB cable and plug the adapter
into an electrical socket to charge the unit.
Complete charging with the adapter takes about 2 hours.
You can use this unit as usual as it is charged by the connected AC
adapter.
NOTE
The charging indicator to the top right of the display shows four
green bars when fully loaded. During charging one green bar after the
other is added.
Charging indicator:
Empty battery
Fully loaded battery
2-Preparation
