background image

the tubes and their function:

V 1 - ECC83 (12AX7): input stage, 2. gain stage; grade: FQ selected
V 2 - ECC83 (12AX7): Lead driver stage, 4. stage; grade: selected
V 3 - ECC83 (12AX7): FX buffer stage, poweramp driver stage; grade: selected
V 4 - ECC83(12AX7):  phase splitter; grade: standard
V 5, V 6 - EL84 (6BQ5): power tubes, poweramp, matched set

Technical Data

Rated power:    

                                                        approx. 20 watts (max.) at 8 or 16 ohms;

Input sensitivity level Input, Clean channel: 

           -40 dB to approx. -5 dB max.; 

Input sensitivity FX Return: 

                                     -20 dB, approx. 0 dB max.;

Output level FX Send, level range: 

                          -10 dB to approx. 0 dB peak;

Balanced Line Output:   

                                           0 dB peak;

Headphones poweramp:

                                          2 x 0.1 Watts at 8 Ohms, solid state circuit

                                                                                  impedance 8 to 32 ohms

Tubes:                                               

                        4 x ECC 83 (12AX7);

further details see below!                                         2 x EL 84 (6BQ5);

Fuses:    

                            

mains fuse at 100 / 110 / 120 mains voltage            0.8 ATL (T: slo-blo);
mains fuse at 220 / 230 / 240 mains voltage            0.4 ATL (T: slo-blo);
Power Tube Fuses (internal on main PCB):                2 x 0.08 AM (M: medium blow)

Important:   

                                                             

Replace fuses only against same type and rating!

Power Consumption:  

                                              approx. 80 watts max.;

Dimensions:

                                                              approx. 34 x 14 (17) x 22 cm;   

                                                                                 13.4" x 5.5" (6.7") x 8.7";  (W x H x D)                       

Weight: 

                                                                    approx. 7 kg; 15.4 lbs;

                                          

Tube array:

Tube replacement report:

1. Replaced on: _ _ _ _ _ _ _  20 _ _ _  Replaced by: _ _ _ _ _ _ _ _ _ _ _ _ _ _

Replaced tubes: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Reason: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Replaced on: _ _ _ _ _ _ _  20 _ _ _  Replaced by: _ _ _ _ _ _ _ _ _ _ _ _ _ _

Replaced tubes: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Reason: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3. Replaced on: _ _ _ _ _ _ _  20 _ _ _  Replaced by: _ _ _ _ _ _ _ _ _ _ _ _ _ _

Replaced tubes: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Reason: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Output

Transformer

Power

Transformer

V 6

EL84

Input

E606 chassis

viewed from

above

V 1

ECC83

V 5

EL84

V 2

ECC83

V 3

ECC83

V 4

ECC83

Summary of Contents for Ironball











Reviews: