background image

V 1

V 2

V 3

V 4

V 5

V 6

V 7

V 8

Power

Transformer

Output

Transformer

Tube replacement report:

1. Replaced on: _ _ _ _ _ _ _  20 _ _ _  Replaced by: _ _ _ _ _ _ _ _ _ _ _ _ _ _

Replaced tubes: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Reason: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Replaced on: _ _ _ _ _ _ _  20 _ _ _  Replaced by: _ _ _ _ _ _ _ _ _ _ _ _ _ _

Replaced tubes: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Reason: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3. Replaced on: _ _ _ _ _ _ _  20 _ _ _  Replaced by: _ _ _ _ _ _ _ _ _ _ _ _ _ _

Replaced tubes: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Reason: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

the tubes and their function:

V 5 - ECC83 (12AX7 or 7025): input stage, 2. stage; grade: FQ selected
V 6 - ECC83 (12AX7): Lead driver stage, 4. stage; grade: selected
V 7 - ECC83 (12AX7): FX buffer stage, poweramp driver stage; grade: selected
V 8 - ECC83(12AX7): phase splitter; grade: standard
V 1 - V 4: 6L6GC or 5881: power tubes, poweramp, matches sets

Technical Data:

Rated power:

                                                            approx. 100 watts at 4, 8 or 16 ohms;

Input sensitivity level Input, Clean channel: 

           -20 dBV nominal, max. 0 dBV 

Input sensitivity FX RETURN:

                                    from -20 dBV to -10 dBV nominal, max. 0 dBV 

Output level FX SEND, level range:

                          from -20 dBV to -10 dBV nominal, max. 0 dBV 

Tubes:

                                         V5:                          ECC 83 / 12AX7 /7025, FQ selected;

                                             V6, V7:                          ECC 83 / 12AX7 selected;
                                                   V8:                          ECC 83 / 12AX7, standard;
                                            V1 - V4:                          6L6GC matched sets.

Fuses:

                                 external:                         1.6 ATL (slow) for the 230 Volt model;

                                                                                  3.15 ATL (slow) in the 100 and 120 Volt models.
                                           internal:                          2 ATL (slow) for the 230 Volt model;
(internal fuse located at the power transformer)      4 ATL (slow) in the 100 and 120 Volt models.

Important:

                                                                 

Replace fuses only against same type and rating!

Power Consumption:

                                                300 watts max.

Dimensions:

                  (W x H x D)                          approx.  71 x 27 x 27 cm;  28" x 10.6" x 10.6";  

Weight:

                                                                      approx. 21 kg; 46.3 lbs;

Tube array:

Summary of Contents for Fireball 100













Reviews: