We reserve the right to make unannounced technical upgrades!
Protect the poweramp from mechanical knocks (tubes!)
Let the poweramp cool down before you transport it (app.10 minutes).
Tubes need about 20 seconds to warm up after you switch the power on,
and furtheron a few minutes before they reach their full power capability.
Avoid storing the poweramp in damp or dusty rooms, they are hard on jacks,
switches and potentiometers.
Ensure air can circulate at the rear, the front and both sides of the poweramp
to allow for adequate cooling (increases component life).
Never operate the poweramp without an adequate load!
Replace tubes with select replacement tubes (special selection criteria)
to avoid microfonic properties, undesireable noise and unbalanced
performance.
Handling and Care
Attention! Please read the following!
This Amp is in a position, to produce high volume levels. Exposure to
high volume levels may cause hearing damage!
Leave tube replacement and power amp biasing to a qualified
professional. Ensure the unit is switched off and unpluged!
Caution -tubes can get very hot and cause skin burns.
Always use high-quality cables.
Never operate the amp through an ungrounded outlet!
Never bridge a defective fuse and ensure replacement fuses feature
identical ratings!
Pull the AC mains plug before replacing fuses!
Never open the chassis or attempt repairs on your own. Consult
qualified service personnel!
Never expose the amplifier to extreme humidity or dampness!
Please read the instructions carefully before operating the unit!
