EnGenius EWS850AP, User Manual

Page: 48 / 81

48
Controller Settings
Controller Address (Auto detection if leave empty)
:
If the device is managing by controller, it will show the
address.
SNMP Settings
This page allows you to assign the Contact Details, Location,
Community Name, and Trap Settings for a Simple Network
Management Protocol (SNMP). SNMP is a networking
management protocol used to monitor network attached
devices. SNMP allows messages (called protocol data units)
to be sent to various parts of the network. Upon receiving
these messages, SNMP compatible devices (called agents)
returns the data stored in their Management Information
Bases.
Status : Enables or disables the SNMP feature.
Contact: Specifies the contact details of the device.
Location:
Specifies the location of the device.
Community Name (Read Only):
Specifies the password
for the SNMP community for read only access.
Community Name (Read/Write): Specifies the password
for the SNMP community with read/write access.
Trap Destination Address:
Specifies the IP address of the
computer that will receive the SNMP traps.
Trap Destination Community Name: Specifies the
password for the SNMP trap community.
Advanced Settings