66
Auction: M5000’s Access Point Mode does not provide DHCP server so the Wireless Client IP address
must configure manually at the same subnet in Local Area Network.
9.2 Client Bridge Mode
Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP Router to
join the network.
Please refer to the last section to check Access point’s configuration.
Client Bridge
Step1
Login to the web-based configuration interface with default IP 192.168.1.1
Step2
Select your country or region’s regulation.
Step3
Select
Operation Mode
to
Client Bridge
from
System Properties
.
Step4
802.11a wireless network.
Step5
Use site survey to scan Access Points that are available in nearby area.
Step6
Select the AP you would like to associate with.
Step7
Setup the authentication settings that match to the Access Point’s setting.
Step8
Press Apply to process all the configurations.
Auction: Client Bridge’s IP setting must match to the Access Point’s subnet.
9.3 WDS Bridge Mode
Use this feature to link multiple APs in a network. All clients associated with any APs can
communicate each other like an ad-hoc mode.