EnGenius ENH710EXT, User Manual

Page: 28 / 74

26
WDS Bridge Mode
In WDS Bridge Mode, the ENH710EXT can wirelessly connect different LANs by configuring the MAC address and
security settings of each ENH710EXT device. Use this mode when two wired LANs located a small distance apart want
to communicate with each other. The best solution is to use the ENH710EXT to wirelessly connect two wired LANs, as
shown in the following diagram.
WDS Bridge Mode can establish up to four WDS links, creating a star-like network.
Note:
WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency
channel. More Access Points connected together may lower throughput. This configuration can be susceptible to
generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to
prevent this from happening.