EnGenius Wireless USB
Adapter
25
o
Scanning: Indicates that the wireless client is searching for an AP
in the area.
o
Disconnected:
Indicates that wireless card does not
associate with any APs
.
Extra Info:
Display information about the link status and the
transmit power.
Channel: The operating frequency channel that the client is using
(infrastructure mode).
Authentication: Displays authentication type.
Encryption: Displays encryption type.
Network Type: Displays network type; infrastructure or ad-hoc.
IP Address: Displays IP address.
Sub Mask: Displays subnet mask IP address.
Default Gateway: Displays IP address of the default gateway.
Link Speed: The current rate at which the client is transmitting and
receiving.
Transmit/Receive Throughput: Displays the Tx (transmit) and Rx
(receive) kilo-bytes per second.
Link Quality: In infrastructure mode, this bar displays the transmission
quality between an AP and a client. In Ad-hoc mode, this bar displays
the transmission quality between one client, and another.
Signal Strength: This bar displays the strength of the signal received
from an AP or client.
Noise Level: Displays the background noise level; a lower level
indicates less interference.
HT: High Through-Put / 802.11 n Section
BW: Channel Bandwidth
GI: Guard Interval
MCS: Modulation Coding Scheme
SNR: Signal Noise Rate
