EnGenius ECB7510, User Manual

Page: 50 / 53

46
9.3. WDS Repeater
Use this feature to link multiple APs in a network, All clients associated with any APs can
communicate each other like an ad-hoc mode.
Please refer to the previous section to check Access point’s configuration.
WDS Bridge
Step1 Login to the web-based configuration interface with default IP
192.168.1.1
Step2 Select a Radio to change Operation Mode to WDS from System
-> Operation Mode .
Step3 Select 802.11a/b/g/n as your wireless mode.
Step4 Select channel you would like to use.
Step5 Setup the authentication settings
Step6 Setup WDS Link Settings.
Step7 Specify the AP’s MAC address you would like to connect with.
Step8 Press Apply to process all the configurations.
Caution: Each WDS bridge’s device must use the same Subnet , Wireless Mode , Wireless
Channel , and Security Setting .
ECB7510
Client
Client
Client
ECB7510
Client
WDS 2.4GHz
Client Client
5GHz
5GHz
5GHz
5GHz
192.168.1.1 192.168.1.2