manualshive.com logo in svg

EnGenius ECB1200, User Manual, Page: 78 / 80

Share
Download
EnGenius ECB1200 User Manual Download Page 78

 

77 

 

Appendix B – CE Interference Statement 

1.1.  Europe 

– EU Declaration of Conformity 

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been 
applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: 
- 

EN60950-1 

- 

Safety of Information Technology Equipment 

- 

EN50385 

- 

Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to 
human exposure to electromagnetic fields (0 Hz - 300 GHz) 

- 

EN 300 328 

- 

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission 
equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering 
essential requirements under article 3.2 of the R&TTE Directive 

EN 301 893  

Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of 
article 3.2 of the R&TTE Directive 

EN 301 489-1  
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio 
equipment and services; Part 1: Common technical requirements 

- 

EN 301 489-17 

- 

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio 
equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance 
RLAN equipment 
 

This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, 
except in France and Italy where restrictive use applies. 
 
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device 
for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. 
 
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 
mW EIRP in the frequency range of 2454 

– 2483.5 MHz. For detailed information the end-user should contact the national spectrum 

authority in France. 

Summary of Contents for ECB1200

















































































Reviews:

No comments