ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater
Version 1.1
40
WPA Authentication Mode
: Select the
Personal (Pre-Shared Key)
radio button.
WPA/WPA2
: Select
TKIP
or
AES
as the cipher suite.
Pre-Shared Key Format
: Select
Passphrase
from the drop-down list.
Pre-Shared Key
: Enter the pass phrase here; this should be between 8 and 63
characters.
Click on the
Apply Changes
button to confirm the changes. This device will
automatically restart once these changes have been applied.
WPA / WPA2 RADIUS Authentication
Encryption
: Select
WPA
or
WPA2
from the drop-down list if your wireless network
uses this encryption. WPA (Wi-Fi Protected Access) was designed to improve upon
the security features of WEP (Wired Equivalent Privacy). The technology is designed
to work with existing Wi-Fi products that have been enabled with WEP. WPA
provides improved data encryption through the Temporal Integrity Protocol (TKIP),
which scrambles the keys using a hashing algorithm and by adding an integrity
checking feature which makes sure that keys haven’t been tampered with.
WPA Authentication Mode
: Select the
Enterprise (RADIUS)
radio button.
WPA/WPA2
: Select
TKIP
or
AES
as the cipher suite.
RADIUS Port:
Enter the port number of the RADIUS server. The default is usually
1812.
RADIUS IP Address:
Enter the IP address of the RADIUS server.
RADIUS Password:
Enter the shared password of the RADIUS server.
Click on the
Apply Changes
button to confirm the changes. This device will
automatically restart once these changes have been applied.
Wireless
Distribution
System
•
Wireless Distribution System uses wireless media to communicate with other APs, like
the Ethernet does. To do this, you must set these APs in the same channel and set MAC
address of other APs which you want to communicate with in the table and then enable
the WDS.
