41
Wireless MAC Filtering is used to allow or deny network
access to wireless clients (computers, tablet PCs, NAS,
smartphones, etc.) according to their MAC addresses. You
can manually add a MAC address to restrict permission to
access EAP1200H. The default setting is:
Disable Wireless
MAC Filter
.
Note:
Only applicable in Access Point and WDS AP mode.
ACL (Access Control List) Mode:
Determines whether
network access is granted or denied to clients whose MAC
addresses appear in the MAC address table on this page.
Choices given are: Disabled, Deny MAC in the list, or Allow
MAC in the list.
MAC Address:
Enter the MAC address of the wireless client.
Add:
Click
Add
to add the MAC address to the MAC Address
table.
Delete:
Deletes the selected entries.
Save:
Click
Save
to apply the changes.
Wireless MAC Filtering
Summary of Contents for EAP1200H
