- 21 -
1. Remove the door from the refrig-
erator by removing the two bolts
each from the bottom Door
hinge and the upper Door hinge.
2. Remove the bolts from the Door
latch plate.
3. Install the upper hinge and the
latch plate to the opposite side
4. Switch the latch position by
following the procedures below.
- Unscrew the screw from the
Latch handle to take apart the
Latch pin and Coil spring.
- Unscrew the Set screw and
screw it on the opposite side of
the Latch pin.
- Insert the Coil spring and Latch
pin to the opposite side of the
door while making sure the
angled face of the Latch pin
Screw
Latch handle
Latch pin
Coil spring
Set screw
Door
faces the cabinet.
- Tighten the Screw to install the
Latch handle.
5. Put the door back to the refrigera-
tor and reinstall the bottom hinge
by tightening the two screws.
Make sure the door gasket touch-
es the cabinet flat and tight when
the door is closed.
11.3 Changing door panel
1. Remove the door from the refrigerator by removing the two bolts
each from the bottom Door hinge and the upper Door hinge.
Refer to 11 for the hinge locations.
2. See the pictures below for changing the door panel.
Panel retainer
Door panel
SR70F,SR48F
ST90F,
STR100F,STF100F
Door panel
Screw
Panel retainer
