−
2
−
SPECIFICATION
DESIGNATION OF PARTS
MODEL
CAPACITY
OUTER DIMENSIONS
INPUT RATING
(FRIDGE or FREEZER)
(WARMER)
REFRIGERANT
WEIGHT
MHD13F-DM
13L
442×284×372 (W×D×H)
VOLTAGE DC 12/24V
3.0/1.5A
2.5/1.3A
HFC-134a
APPROX. 11.5kg
Though it will operate satisfactory for long period of up to 30°off level, the product should be installed
on a level and solid surface. Make sure the product is not in direct sunlight (Fig 1), near a gas stove, a
heater, or any other heat-generating appliances.
To achieve good cooling performance and less current consumption, adequate ventilation for product
is needed. Install the product at least 150mm or more away from the wall. (Fig 2)
Avoid installing the product close to a kitchen sink or water faucet.
The product has been thoroughly cleaned prior shipment from the factory.
It is advisable, however, to clean the interior once again before use.
Clean the interior with a damp cloth moistened in warm water and wipe with a dry cloth.
=CAUTION=
＊
Never use the product to store gasoline or other inflammable vapors and liquids as these may
cause explosion.
＊
Do not touch the evaporator and other metal parts of the cabinet with wet hands, as this may
cause frostbite.
＊
Do not remove or modify any of the electrical parts as this may cause electric shock or damage to
the product.
CABINET
SHOLDER
STRAP
LOUVER
CONTROL
PANEL
LID
INSTALLATION
150mm
150mm
Wall
(Fig 1)
(Fig 2)
