【How to Replace Cooling System】
1. Remove four screw （Fig.1-①), remove the door assy.
2. Remove screw （Fig.1-②), remove the latch
3. Pull out thermostat dial. (Fig2－①)
4. Remove four screw, remove the bottom case.（Fig.2-②)
5. Remove two screws that stop the wire condensor. （Fig3‐①)
6. Remove two screws, remove the holderassy. （Fig3-②)
7. Remove two pin coupler of EVA. thermistor. (Fig4-①)
7. REPLACING PARTS
13
LATCH
Fig.1
②
①
DOOR
ASSY
①
②
Fig.2
CASE BOTTOM
Fig.4
①
In the case of power supply only exchange,
WORK TIPS
Fig.3
①
②
During assembly, please tighten the screws in
the same position as the removed screw
position. (See below; "Screws position")
WORK TIPS
1st
9th
10th
7th
6th
1st
7th
6th
1st
1st
7th
8th
Screws position
POWER SUPPLY
HOLDER ASSY
WIRE CONDENSER
SCREW
WORK TIPS
