www.engcom.se
11
Hardware Installation
Device Drivers Installation
If you have just completed an upgrade from the 2.08 version of our
software you do NOT need to perform any of the following steps. Instead
download and read the new 3.xx User Manual from the Engcom website
and start taking advantage of the new exiting features the new 3.xx
version has to offer.
After the software installation process has been completed and the target
PC has been Re Booted, connect one end of the USB cable (Provided
within the Phone Recorder USB 3.0 package) to an available USB port on
your personal computer. Insert the other end of the USB cable into the
Phone Recorder USB device.
Microsoft Windows Hardware Installation Wizard will automatically start.
Allow the Wizard to automatically look for and install the necessary Device
Drivers. When successfully completed you will receive a notification on
your screen stating that the Device Drivers were installed and that the
Device is ready to use.
Another indication that the Phone Recorder USB is ready for use is LED
lights status on the Recorder. The Green Power LED (on the left) is
illuminated. The Rec Room, Rec Phone and Play/Stop Status Red LEDs (on
the right) will all be illuminated solid and the Rewind Fast Forward LED will
blink.
