CenCon
3
CONTACT INFORMATION
Canadian Head Office and Factory
1401 Hastings Cres. SE
Calgary, Alberta, Canada
T2G 4C8
PH: (403) 287 2590
FX: 1 888 364 2727
Email:
USA Head Office and Factory
32050 W. 83
rd
Street
De Soto, Kansas, USA
66018
PH: (913) 583 3181
FX: (913) 583 1406
Canadian Eastern Factory
1175 Twinney Drive
Newmarket, Ontario, Canada
L3Y 5V7
PH: (905) 898 1114
FX: (905) 898 7244
WARNINGS, CAUTIONS AND
NOTICES
Warning, Caution and Notice statements are used
throughout this manual to emphasize important and
critical information. You must read these
statements to help ensure safety and to prevent
damage.
m
WARNING:
Indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
m
CAUTION:
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
m
NOTICE:
Indicates information considered important but not
hazard related.
m
WARNING:
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation,
operation and maintenance instructions
thoroughly before installing or servicing this
equipment.
m
c
WARNING:
This unit is connected to high voltages. Electrical
shock could occur if instructions are not
followed. This equipment contains moving parts
that can start unexpectedly. Injury or death
could occur if instructions are not followed. All
work must be performed by a qualified
technician. Always disconnect and lock out
power before servicing. DO NOT bypass any
interlock or safety switches under any
circumstances.
m
CAUTION:
All the remote wiring must be complete and
functional before attempting to start the
appliance.
m
CAUTION:
It is important that the service technician
understands the CenCon is a configurable
controller. Its operation on one appliance of
equipment may not mimic another.
m
CAUTION:
The CenCon is specifically programmed for this
specific appliance. Do not replace with another
controller without confirming its program
suitability with Engineered Air.