ENFORCER HDMI Surge Protector
SECO-LARM U.S.A., Inc.
3
To ground
2
(can be attached to either end of surge protector)
HDMI Player
(Not Protected)
HDMI Surge
Protector
HDMI cable
1
Protected
End
HDMI Monitor
(Protected)
Unprotected
End
Short
HDMI
cable
(Ground can be attached to either end of surge protectors)
HDMI Monitor
(Protected)
Short
HDMI
cable
HDMI Surge
Protector
HDMI Surge
Protector
HDMI cable
1
To ground
2
To ground
2
HDMI Player
(Protected)
Protected
End
Protected
End
Unprotected End
Short
HDMI
cable
Protecting Multiple Devices:
Installation:
1.
Detach the existing HDMI cable
1
from the device to be protected and attach that cable to the
―Unprotected‖ end of the HDMI Surge Protector.
2.
Attach another HDMI cable (not included) between the device to be protected and the
―Protected‖ end of the HDMI Surge Protector. The protected cables should be as short as
possible and should not cross unprotected cables.
3.
Connect the ground wire from the HDMI Surge Protector (either end
2
) to earth ground. The
system should use a single ground point and the protected device should be isolated from
ground.
1.
Detach the HDMI cable
1
from both devices to be protected.
2.
Attach an HDMI Surge Protector to each end of the HDMI cable, ensuring that the cable is
connected to the ―Unprotected‖ end of the HDMI Surge Protector.
3.
Attach another HDMI cable (not included) between each device to be protected and the
―Protected‖ end of its respective HDMI Surge Protector. For best protection, the protected
cables should be as short as possible and should not cross unprotected cables.
4.
Connect the ground wire from each HDMI Surge Protector (either end
2
) to earth ground. The
system should use a single ground point and the protected device should be isolated from
ground.
Protecting a Single Device:
NOTE
: These instructions assume that 2 HDMI devices have already been connected together.
1
Note:
The maximum length of the HDMI cable will depend on the cable‘s specification and quality.
2
Note:
There is a ‗Grounding Wire Location‘ included on both ends of the HDMI Surge Protector.
Grounding wire can be attached to either of these locations.
