ENFORCER 4-in-1 HD to HDMI Converter
SECO-LARM U.S.A., Inc.
3
DIP Switch Settings and Button Functions:
Output
Mode
DIP
1
DIP
2
DIP
3
DIP
4
Function Buttons
Left
Right
Left + Right
+
Loop output OFF OFF OFF OFF Decrease output
resolution
Increase output
resolution
Switch AHD/CVI
(requires power cycle)
1
CVBS
output
ON OFF OFF OFF
Decrease CVBS
underscan
Increase CVBS
underscan
Switch CVBS output
4:3/16:9
Dual input OFF ON OFF OFF CVBS Input (main)
CVBS Input (secondary) Switch 4:3/16:9
(CVBS main input only)
PIP
2
output
OFF ON ON OFF Adjust PIP positioning
counterclockwise
Adjust PIP positioning
clockwise
Switch PIP main source
PIP output
OFF ON ON ON Decrease PIP sizing
Increase PIP sizing
N/A
Installation:
1.
Determine the location where the 4-in-1 HD to HDMI Converter will be installed.
2.
Use the DIP switches to set the desired output mode.
3.
Plug the BNC cable from the CCTV camera to the CVBS Input (Main) BNC connector on the converter.
4.
Plug the remaining VGA, HDMI, and BNC output cables into their respective ports as necessary.
a.
For loop output, connect the other end of the BNC output cable to the local DVR or monitor.
b.
For CVBS output, connect the other end of the BNC output cable to the local DVR or monitor.
c.
For dual video input, connect the other end of the BNC output cable to the secondary CCTV camera.
5.
Plug the 12VDC adapter into the converter.
6.
Once all cables are routed use the included mounting screws and mounting screw anchors to
permanently mount the unit.
7.
Use the function buttons to adjust the output resolution, CVBS underscan, picture-in-picture position, or
picture-in-picture size based on the DIP switch settings.
8.
If needed, adjust your monitor settings according to the manufacturer’s instructions.
1
If an HD-CVI or HD-AHD source is used and the image displayed is B&W then press both function buttons at the same time and power
cycle the converter. Upon power up the image will display correctly. HD-TVI does not require a power cycle to output correctly.
2
PIP: Picture-in-Picture (for dual inputs)
Sample Applications:
Loop Output Application:
Resolution
12VDC
Adapter
HDMI
Monitor
VGA
Monitor
HD Analog
Camera
HD Analog DVR
On
1 2 3 4
Loop output
DIP switch settings:
CVBS Output Application:
On
1 2 3 4
CVBS output
DIP switch settings:
VGA
Monitor
Security
Monitor
HD Analog
Camera
Underscan
12VDC
Adapter
HDMI
Monitor
