SECO-LARM BNC VIDEO CONVERTERS
2
SECO-LARM U.S.A., Inc.
Table of Contents:
Features .......................................................... 1
Introduction ..................................................... 2
Specifications.................................................. 2
Parts List / Installation..................................... 2
Sample application / Overview ........................ 3
OSD Programming / Menu .............................. 4
Troubleshooting .............................................. 4
Warranty .......................................................... 4
Introduction:
Model #
VC-1BAQ, VC-1BBQ
VC-3BAQ, VC-3BBQ
VC-2VAQ, VC-2VBQ
Conversion type
BNC to VGA
VGA to BNC
Input signal
Composite video 1Vp-p 75ohm BNC jack
VGA
Output signal
VGA: 0.7 Vp-p RGB,
15 pin female D-sub
VGA: 0.7 Vp-p RGB,
15 pin female D-sub
VGA: 0.7 Vp-p RGB
15 pin female D-sub
Composite video
1Vp-p 75ohm BNC
Composite Video
1Vp-p 75ohm BNC
Current consumption
200mA@5VDC
800mA@5VDC
500mA@5VDC
Maximum resolution
NTSC: 720x480
PAL: 720x576
Up to 1280x1024
NTSC: 720x480
PAL: 720x576
Up to 1024x768
NTSC: 720x480
PAL: 720x576
Power source
1A@5VDC, 2.5 mm
1A@5VDC, 2.5 mm
1A@5VDC, 2.5 mm
Operating Temperature
32°F~131°F (0°~55°C)
32°F~131°F (0°~55°C)
32°F~131°F (0°~55°C)
Dimensions
5
3
/
4
" x 2
5
/
8
" x 1
1
/
16
"
(145 x 67 x 27 mm)
3
3
/
8
” x 3
1
/
4
” x 1
1
/
16
”
(85 x 83 x 27 mm)
4
13
/
16
” x 3
3
/
16
” x 1
1
/
16
“
(122 x 81 x 27 mm)
Weight
7.8-oz (220g)
7.2-oz (205g)
9.3-oz (265g)
Parts List:
Installation:
1x Converter
1x Mounting bracket
(VESA-compatible)
4x VESA mount screws
4x Monitor mount screws
4x Wall mount screws
4x Plastic Wall Anchors
4x Rubber feet
1x Manual
1x 5VDC power adapter
(except VC-1BBQ,
VC-3BBQ, and VC-2VBQ)
1.
Determine the location of where the BNC / VGA converter will
be installed. Attach the converter to VESA mount if needed and
attach to mounting location.
2.
Plug the BNC cable into the female-BNC port on the converter.
3.
Plug the VGA cable into female-VGA port on the converter (or
BNC cable to BNC port).
4.
Plug the 5VDC adapter into the converter unit.
5.
Turn on the display and the video output device to which the
converter is connected.
6.
Use the OSD menu to adjust the brightness, contrast, tint, color,
and other features until the picture is displayed correctly. See
p.4,
On-Screen Display Programming and Menu Controls
.
7.
If needed, adjust your monitor settings according to the
manufacturer’s instructions.
Specifications:
The SECO-LARM BNC to VGA Converter is the ideal way to transform a BNC video signal into a VGA
signal. Traditional CCTV monitors can now be replaced by any display unit with VGA input. The BNC to
VGA Converter is compact and can be mounted nearly anywhere including on the VESA mount found on
most VGA monitors. SECO-LARM BNC to VGA Converters come in basic and high resolution models.
The SECO-LARM VGA to BNC converter converts your VGA signal to be viewed on any TV, projector,
or other viewing device that uses standard BNC connector while also viewing it on a VGA monitor.
