ENFORCER Retro-Reflective Photoelectric Beam Sensor
4
SECO-LARM U.S.A., Inc.
Sensor does not detect the object
Change the angle of the sensor or readjust the sensitivity setting
Yellow LED does not turn on
Clean the sensor and reflector with a damp (not wet) cloth
Adjust the reflector and/or sensor for proper alignment
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for 1 (one) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2018 SECO-LARM U.S.A., Inc. All
rights reserved.
®
PITSW3
MI_E-936-S45RRGQ_180531.docx
Troubleshooting:
Mounting the Sensor:
Wiring:
Note:
1.
Can be connected to AC or DC voltage
2.
Maximum cable extension length is
325ft (100m)
For E-931ACC-BLS5Q Bracket
For E-931ACC-BLS1Q Bracket
Connection (5 wires)
Brown
12-30V DC/AC (60Hz), 100mA
(Non-polarized)
Blue
Gray (N.O.)
White (COM)
Black (N.C.)
Multi-voltage
circuit
Relay Output
10kΩ
Optional Accessories Available from
SECO-LARM
®
:
E-931ACC-R2Q
Square Reflector
E-931ACC-RC1Q
Round Reflector
E-931ACC-HR1Q
Reflector Hood for
Round/Square Reflector
E-931ACC-BLR2Q
Reflector Bracket
E-931ACC-BLS1Q
Sensor Bracket
E-931ACC-BLS5Q
Sensor Bracket
E-931ACC-BLS7Q
Wall Bracket
E-931ACC-BLS8Q
Door Frame Bracket
E-931ACC-BLS6Q
Single-gang Bracket
