ENFORCER Illuminated Push-to-Open Bar
2
SECO-LARM U.S.A., Inc.
1x Illuminated push bar
5x Machine screws
1x Dogging key
1x Keyhole cover
2x Self-stick wiring
anchors
1x Manual
Overview:
Specifications
Parts List:
Specifications:
Parts List:
Please read the manual carefully before beginning installation.
1.
Hold the push bar unit on the door at the desired
height, ensuring that there is sufficient space on
both ends as noted below. With a pencil, mark
the lower edge of the base and the edge of the
base end cap on the latch side of the door.
NOTES:
•
Leave at least
9
/
16
" (1.5cm)
space between the door edges
and both ends of the base.
•
Level with a bubble level.
•
The height of the push bar from
the floor may be subject to
local regulations.
•
Usually, the bar is centered but for wider
doors it can be closer to the latch side.
2.
Remove the two screws from each of the push
bar end caps and remove the end caps.
If you need to cut the push bar to fit a door narrower
than 36" (91.4cm), skip to step 4.
3.
For doors at least 36" (91.4cm) wide, mount the
bar to the door. Using the lines drawn in step 1,
hold the base in place and mark 4 mounting
screw holes (and the wiring hole if wiring runs
through a hollow door using an electric transfer
hinge). Drill holes, making sure not to go all the
way through the door and mount on the door.
P U S H T O E X I T
Installation:
33
7
/
16
" (850mm)
2
3
/
8
"
(61mm)
8
1
/
4
" (210mm)
1" (25mm)
*Dogging key shown in use (normally removed)
Cutaway View
LED Indicator
Push bar
Dogging key*
Base end
cap (x2)
PCB
Spring loaded push
bar bracket (x2)
Push bar end
cap (x2)
2
3
/
8
"
(61mm)
Punchout for
Exposed wiring (x2)
Operating voltage
12~24 VDC
Power consumption
180mA@12VDC, 140mA@24VDC (max.)
Contact load
≤5A@230VAC
Outputs
NO/NC/COM x2
Trigger duration
0.5~60 seconds (adjustable) or dogged open
Buzzer
Up to 92dB (adjustable)
LED
Indicator
Colors
Stand-alone red/green, Controlled red/green/blue
Size
8
1
/
4
"x1" (210x25 mm)
Door width
36" (91.4cm), minimum 23
5
/
8
" (60cm)
Operating temperature
32°~150° F (0°~70° C)
Dimensions
33
7
/
16
"x2
3
/
8
"x2
3
/
8
" (850x61x61 mm)
Weight
4-lb 10-oz (2.1kg)
≥
9
/
16
"
(1.5cm)
