®
The ENFORCER Illuminated Push-to-Open Bar works with an external electric strike or maglock to
provide egress from a protected area. It can work in stand-alone mode or as part of an access
control system, but also can be locked open by key. Buzzer, output timing, and LED function and
colors are also customizable.
SD-961A-36SLQ
Illuminated Push-to-Open Bar
Manual
Features:
•
Provides convenient on-door egress
•
LED makes it easy to see the status
•
Can be stand-alone or connected to an
access control system
•
Two built-in non-latching (momentary), dual-
contact outputs (NO/NC/COM) rated at
≤5A@230VAC, adjustable 0.5~60 sec
•
Dogging – standard dogging with hex key
•
For 36" doors – actual length: 33
7
/
16
" (85cm)
•
Can be cut to fit smaller doors, minimum
23
5
/
8
" (60cm)
•
Large LED shows red in standby and green
when triggered, but is programmable
red/green/blue by an access control panel
•
Blinking LED and buzzer programmable for
relock warning
•
Built-in buzzer indicates unlocked (selectable,
up to 92dB)
