ENFORCER Grade 1 Rim-Type Exit Device
4
SECO-LARM U.S.A., Inc.
Final Installation:
1.
Mark the vertical center line of the exit bar by drawing a line across the door at 40” above the
floor. See “Mounting” on page 3.
2.
Fold the included template, and align the center lines on the template with the center line drawn
on the door. Then mark the position of the mounting holes for the latch assembly.
See “Mounting” on page 3.
3.
Move the template against the door stop and then mark the mounting holes for the strike.
4.
Drill the holes as marked on the door and the mullion. See “Mounting” on page 3.
NOTE: Diagram shows 6 screws for mounting the chassis. Product only includes 4 screws. For best results, use 6 screws.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2018 SECO-LARM U.S.A., Inc. All
rights reserved.
LIMITED WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while
used in normal service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to
the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty
is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such
equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole
obligation of SECO
-
LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damage of any kind to the purchaser or anyone else.
SECO-LARM
®
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
PITSW6
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
MI_SD-962AR-36G_180403.docx
WARNING:
Incorrect mounting that leads to exposure or moisture inside the enclosure could damage the device and will
void the warranty.
WARNING:
Un montage incorrect qui conduit à une exposition à la pluie ou à l’humidité a l’intérieur de l’enceinte pourrait
endommager l’appareil et annuler la garantie.
