ENFORCER Flush-Mount Request-to-Exit Plate
SECO-LARM U.S.A., Inc.
3
Installation:
1.
Remove the back plate from the unit.
2.
Thread the cable wire through the electrical
box and the center hole of the back plate.
3.
Fasten the back plate to the electrical box
using the included mounting screws.
4.
Connect the wires to the switch using the
wiring diagram below.
5.
Finish assembly by snapping the front cover
onto the back plate.
Front cover
Back plate
Electrical box
(not included)
Switch Mounting
screws
Wiring Diagram:
Sample Application:
Side View
1.
Normally closed (N.C.) on
the
SD-7286-GWQ
is
connected to a keypad such
as the
SD-1123-SQ
. The
other N.C. terminal is
connected to power.
2.
An electromagnetic lock,
such as the
E-941SA-600
, is
connected to normally closed
(N.C.) on the keypad’s relay.
3.
Pressing the button on the
SD-7286-GWQ
will open the
electromagnetic lock.
N.C.
COM
N.O.
R
EL
AY
12 VDC
Power Supply
N.O.
N.C.
N.C.
N.O.
SD-7286-GWQ
Keypad
(
SK-1123-SQ
)
Electromagnetic Lock
(
E-941SA-600Q
)
N.O. (Normally Open)
N.C. (Normally Closed)
N.C. (Normally Closed)
N.O. (Normally Open)
